geboshi_V1/LeatherProject/LeatherApp/Enums.cs

using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;

namespace LeatherApp
{
    //public enum CurrentPTEnum
    //{ 
    //    [Description("初始位")]
    //    InitPT = 1,
    //    [Description("上料位")]
    //    UpPT = 2,
    //    [Description("下料位")]
    //    DownPT = 3,
    //    [Description("运行中")]
    //    Moving = 4,
    //    [Description("打标中")]
    //    MakeTag = 5
    //}
    public enum CurrentStateEnum
    {
        初始 = 0,
        //等待启动 = 1,  
        //等待扫码 = 2,//在暂停3和运行中4时都可以等待扫码，扫码后即开始等待相机照片
        暂停 = 3,//解除告警->等待启动 (可复位、下料中) 
        //急停 = 4, //解除告警->等待复位 
        运行中 = 5,
        //下料中 = 6, //没有暂停，完成后->等待启动
        //打标中=7,//可复位、暂停、急停、下料
        //结束 = 8,// 同等待启动-1
    }
    public enum WarningEnum
    {
        [Description("正常")]
        Normal = 0,
        [Description("低(可继续)")]
        Low = 1,
        [Description("严重")]
        High = 2
    }

    public enum IODirectionEnum
    {
        [Description("仅输入")]
        输入 = 0,
        [Description("仅输出")]
        输出 = 1,
        [Description("输入与输出")]
        输入输出 = 2,
    }
    public enum AIEngineLibEnum
    {
        [Description("缺陷库")]
        缺陷库 = 0,
        [Description("测量库")]
        测量库 = 1,
        [Description("缺陷与测量库")]
        缺陷与测量库 = 2,
    }
    //public enum PowerLevelEnum
    //{
    //    [Description("低电平")]
    //    高 = 0,
    //    [Description("高电平")]
    //    低 = 1,
    //}

    public enum AxisName
    {
        [Description("0-Axis")]
        Axis0 = 0,
        [Description("1-Axis")]
        Axis1 = 1,
        [Description("2-Axis")]
        Axis2 = 2,
        [Description("3-Axis")]
        Axis3 = 3,
    }
    //[Serializable]
    //[TypeConverter(typeof(ExpandableObjectConverter))]
    //public class MultiAxisName
    //{ 
    //    public int Axis0 { get; set; }
    //    public int Axis1 { get; set; }
    //    //public bool Axis2 { get; set; }
    //    //public bool Axis3 { get; set; }
    //}
    /// <summary>
    /// 轴脉冲模式
    /// </summary>
    public enum AxisPulseOutMode
    {
        OUT_DIR = 0x1,
        OUT_DIR_OUT_NEG = 0x02,
        OUT_DIR_DIR_NEG = 0x04,
        OUT_DIR_ALL_NEG = 0x08,
        O_CW_CCW = 0x10,
        CW_CCW_ALL_NEG = 0x20,
    }
 
    /// <summary>
    /// 回原点方式
    /// </summary>
    public enum AxitHomeMode
    {
        MODE1_Abs = 0,
        MODE2_Lmt = 1,
        MODE3_Ref = 2,
        MODE4_Abs_Ref = 3,
        MODE5_Abs_NegRef = 4,
        MODE6_Lmt_Ref = 5,
        MODE7_AbsSearch = 6,
        MODE8_LmtSearch = 7,
        MODE9_AbsSearch_Ref = 8,
        MODE10_AbsSearch_NegRef = 9,
        MODE11_LmtSearch_Ref = 10,
        MODE12_AbsSearchReFind = 11,
        MODE13_LmtSearchReFind = 12,
        MODE14_AbsSearchReFind_Ref = 13,
        MODE15_AbsSearchReFind_NegRef = 14,
        MODE16_LmtSearchReFind_Ref = 15,
    }
    public enum AxHomeDirection
    {
        正向 = 0,
        负向 = 1,
    }
    public enum AxMoveMode
    {
        MODE1_Abs = 0,
        MODE2_Rel = 1,
    }
    public enum SmallAxCmdPos
    {
        倍率0_679X = 0,
        倍率0_7X = 550,
        倍率1_0X = 4780,
        倍率1_5X = 7850,
        倍率2_0X = 10500,
        倍率2_5X = 13300,
        倍率3_0X = 15360,
        倍率3_5X = 16890,
        倍率4_0X = 18230,
        倍率4_5X = 19350,
    }
    public enum CMDName
    {
        IO默认输出 = 0,

        启动按钮 = 10,//输入+输出
        暂停按钮 = 11,//输入+输出
        复位按钮 = 12,//输入+输出
         
        绿灯输出 = 15,
        黄灯输出 = 16,
        红灯输出 = 17,
        日光灯输出 = 18,

        蜂鸣器输出 = 20,
         
        张力读取 = 25,//张力读取
        //喷墨输出 = 26,

        //门磁告警输入=30,
        //喷墨告警输入 = 31,
        //厚度气缸与轴运动告警 = 34,

        结束完成输出 = 35,

        金属检测输入 = 40,
        //Y轴复位完成输入 = 41,
    }

    //---
    //public int DKCount { get; set; }//堵孔数量
    //public int ZWCount { get; set; }//脏污数量
    //public int GSYCCount { get; set; }//钢丝异常数量
    //public int XWSCount { get; set; }//纤维丝数量
    //public int QKCount { get; set; }//缺口数量
    //public int ZKCount { get; set; }//针孔数量
    //public int PPCount { get; set; }//泡泡数量
    //public int HSCount { get; set; }//划伤数量
    //public int YXCount { get; set; }//压线数量 
    //public int XBCount { get; set; }//斜边数量 new
    //public int SXCount { get; set; }//栅线数量 new
    public enum DefectCodeEnum
    {
        jb,
        wy,
        mj,
        hy,
        lj,
        yss,
        zy,
        wc,
        cs,
        cy,
        tcy,
        jt,
    }
    public enum DefectNameEnum
    {
        浆斑,
        污印,
        棉结,
        黄印,
        垃圾,
        异色丝,
        皱印,
        蚊虫,
        擦伤,
        重影,
        停车印,
        接头,
    } 
 
    public enum ValType
    {
        字符串,
        数值,
    }
    public static class EnumConvert
    {
        public static List<Color> DefectColor = new List<Color>() { Color.Red, Color.Green, Color.DarkViolet , Color.Magenta, Color.Orange, Color.Brown,
                                    Color.Olive, Color.PaleGreen, Color.CadetBlue,Color.Aqua,Color.YellowGreen,Color.Blue,Color.SpringGreen,Color.Fuchsia };
        public static DefectNameEnum ConvertDefectCode2Name(DefectCodeEnum val)
        {
            int v = (int)val;
            return (DefectNameEnum)v;
        }
        public static DefectCodeEnum ConvertDefectName2Code(DefectNameEnum val)
        {
            int v = (int)val;
            return (DefectCodeEnum)v;
        }
         
    }



    #region 设备厂家与型号
    public enum LightDevNameEnum
    {
        海康 = 0,
        锐视 = 10,
    }
    public enum CamerDevNameEnum
    {
        海康 = 0,
        埃科 = 10,
    }
    #endregion

}